You will want to repair this properly. You don’t want a rock cruising through a window or siding.
fatherofpugs12
What about a metal shop near you? I cracked my mower by the discharge chute and thought it would be an arm and a leg. It was $15 last year.
It was a five minute job. Sometimes you can get lucky. Worth calling around if the mower still runs well
Superb-Respect-1313
Eventually no matter how hard we try every thing reaches an end of life scenario. Sorry for your loss
B-Georgio
I’d add a 2nd layer of gorilla tape just to make sure, but than again I’m a sissy
Fit-Narwhal-3989
🫂
p4rty_sl0th
JB weld
Mawgac
Didujustcallmejobin
Ill allow it.
kevin4info
That is an easy bondo fix. My 25 yr old is held together with it. Still running strong with a Honda engine.
Horror_Cherry8864
That’s gonna launch a rock or stick. If you’re lucky it’ll just break a window.
PraiseTalos66012
Metal mesh on the outside and body filler all over both sides. Sand it smooth on the inside after and it’ll be as good as new.
Mission_While917
It’s not worth fixing. If your seeing that on outside good chance that underneath the baffles are worn out or getting thin. Unless you are handy with tools and motor is good . U probably could ask your local lawnmower sales guy for a mower that owner junked. Might get lucky and find good deck and premature blown motor .
15 Comments
https://preview.redd.it/zwyk1wj4y9if1.jpeg?width=573&format=pjpg&auto=webp&s=31cf57a4a0b8be09446f900aafbc73e25bb0e6da
Scour out the rust and bondo time, baby!
That Honda mower will outlive all of us
You will want to repair this properly. You don’t want a rock cruising through a window or siding.
What about a metal shop near you? I cracked my mower by the discharge chute and thought it would be an arm and a leg. It was $15 last year.
It was a five minute job. Sometimes you can get lucky. Worth calling around if the mower still runs well
Eventually no matter how hard we try every thing reaches an end of life scenario. Sorry for your loss
I’d add a 2nd layer of gorilla tape just to make sure, but than again I’m a sissy
🫂
JB weld
Ill allow it.
That is an easy bondo fix. My 25 yr old is held together with it. Still running strong with a Honda engine.
That’s gonna launch a rock or stick. If you’re lucky it’ll just break a window.
Metal mesh on the outside and body filler all over both sides. Sand it smooth on the inside after and it’ll be as good as new.
It’s not worth fixing. If your seeing that on outside good chance that underneath the baffles are worn out or getting thin. Unless you are handy with tools and motor is good . U probably could ask your local lawnmower sales guy for a mower that owner junked. Might get lucky and find good deck and premature blown motor .