Well if it were me, I sure would. Also, make sure the grade of soil slants AWAY from the foundation of your house while you’re at it.
I’m getting old, which means the projects that I do have to be the last time I do that particular job. With that in mind I would use 4″ ADS with a sock on it. I’d put it right down the center of the wheel wells, about 4 inches below the top of the pipe. I would put a pitch on the pipe to make sure the water ran where I wanted it to go (I hate to do rework).
I would also put down some kind of weed barrier, because string trimmers Hate gravel. I use pieces of old carpeting turned upside down. Then lay the gravel, using the calculation of 1 cubic yard of grave is 10′ by 10′, 3 inches deep. Good luck!
1 Comment
Well if it were me, I sure would. Also, make sure the grade of soil slants AWAY from the foundation of your house while you’re at it.
I’m getting old, which means the projects that I do have to be the last time I do that particular job. With that in mind I would use 4″ ADS with a sock on it. I’d put it right down the center of the wheel wells, about 4 inches below the top of the pipe. I would put a pitch on the pipe to make sure the water ran where I wanted it to go (I hate to do rework).
I would also put down some kind of weed barrier, because string trimmers Hate gravel. I use pieces of old carpeting turned upside down. Then lay the gravel, using the calculation of 1 cubic yard of grave is 10′ by 10′, 3 inches deep. Good luck!